86
EN
86
EN
SETUPS
C
Dolby Digital (Default : Stream)
Use [
K
/
L
] to select a setting, then press [OK].
Dolby Digital
PCM
Stream
Your setting will be activated.
PCM
:
Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Stream :
Outputs Dolby Digital signals
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
3
Disc Menu Language (Default : English)
Set the language for disc menu.
Use [
K
/
L
] to select a setting, then press [OK].
Disc Menu Language
English
French
Spanish
Other
Your setting will be activated.
4
Audio Language (Default : Original)
Set the audio language.
Use [
K
/
L
] to select a setting, then press [OK].
Audio Language
Original
English
French
Spanish
Other
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
5
Subtitle Language (Default : OFF)
Set the subtitle language.
Use [
K
/
L
] to select a setting, then press [OK].
Subtitle Language
OFF
English
French
Spanish
Other
Your setting will be activated.
If “Other” is selected for
3
to
5
, press 4-digit code
using
[the Number buttons]
.
Code Input
-
-
-
-
• When you finish entering the code, press [OK]. Refer
to the language code table on page 100.
Note
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press
[CLEAR]
or
[
s
]
to erase numbers entered
incorrectly.
6
Angle Icon (Default : ON)
Set to “ON” to show the angle icon during the playback.
Use [
K
/
L
] to select a setting, then press [OK].
Angle Icon
ON
OFF
Your setting will be activated.
7
Still Mode (Default : Auto)
Select “Auto” usually.
Use [
K
/
L
] to select a setting, then press [OK].
Still Mode
Auto
Field
Frame
Your setting will be activated.
Auto :
Optimum resolution setting (“Field” or
“Frame”) will be selected.
Field :
Images in the still mode will be stabilized.
Frame :
Images in the still mode will be highly defined.
Note
• Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
Playback (cont’d)
E9M81UD_ZV457MG9.indd 86
E9M81UD_ZV457MG9.indd 86
2008/05/15 14:32:03
2008/05/15 14:32:03