(E)
2-1
LY71
ABS
ABS
INC
Change in INC
Change in INC
Datum point setting
Reset (Preset)
Pitch measurement
Pitch measurement
Reset (Preset)
2. Applied Operation
When the
key is pressed to switch to axis selection mode, pressing a different function key cancels axis
selection mode.
2-1. Inch/mm Selector
Basically, this operation can be done in any mode.
∗
The selector is only effective if the destination country is set to US or STD. You can confirm the current
unit by looking at the lit display below the key.
1
Press the
key.
2
Returning to the previous unit display
Press the
key again.
2-2. Determining the Measurement Datum Point Position (Datum Point
Setting)
Although pitch measurement (Incremental (INC)) can be made from positions that were reset or preset, the
total dimensions are unknown. The total measurement (Absolute (ABS)) can also be made when the datum
point is set.
(See “2-3. Switching between the ABS Display and INC Display”.)
•
The maximum value, minimum value, and peak-to-peak value are calculated based on the INC value.
•
The counter display showing the peak value (maximum value, minimum value, peak-to-peak value)
cannot set the datum point.
1
Press the
key. (The
lamp lights on.)
2
Press the
key. (The ABS lamp flashes.)
3
Use the
key to move the counter display digit, and then use the numeric keys to enter the position
(numerical value) for the datum point.
4
Use the
key to set the value.
∗
When the datum point is set, the INC value is initialized and is identical to the ABS value until it is reset
or preset.
∗
Counter display C is a reference display, and so it cannot set the datum point.
Summary of Contents for LY71
