background image

 (E) 

2-5

LY71

2. Applied Operation

2-10. Power Outage Detection On/Off

In the shipping settings, 

 is displayed to indicate that a power outage has occurred. When the detection

setting is activated, 

 is displayed whenever the power is turned on.

The setting can also be made to display the count directly when the power is turned on without detection.

The basic settings cannot be made during count display. To change the basic settings, first return the display
to the setting (power outage detection on).

Installation manual “4-3. Advanced Settings” (Display at power ON)

2-11. Power Save

The display can be turned off automatically when no operations will be performed for a certain period of
time such as when pausing work during operation. The display is restored whenever the measuring unit is
moved or a key operation is made.

Installation manual “4-3. Advanced Settings” (Sleep)

2-12. Using Measuring Units with Two Axes for Measurement

The count for a measuring units with two axes can be displayed individually or the sum/difference of the two
axes can be displayed. This enables measurement of the difference, thickness, or other parameters.

Installation manual “4-2. Making and Changing Basic Settings” (Input Axis Selection)

If the data for two axes are displayed individually, the maximum value and minimum value of the two axes
can also be measured.

“2-13. Operation for each Axis”

Summary of Contents for LY71













































Reviews: