Enrange MLTX2 Intrinsically Safe
Transmitter Instruction Manual
April 2019
Page 20 of 44
NOTE: On 433 MHz systems, the signal strength indicator will show minimum signal strength regardless
of the actual signal strength (systems utilizing the 433 MHz frequency band do not have Two-Way
feedback).
3.7.5
Two-Way Feedback System
This option allows the user to view various parameters that may be important to the operation of the
equipment on the graphic user interface display screen.
Parameters such as engine RPM, the torque or speed of a drive, temperature, current, or any other useful
values can be sent from the receiver and displayed on the transmitter.
NOTE: Systems utilizing the 433 MHz frequency band do NOT have Two-Way feedback available.
3.8
JOYSTICKS AND PADDLES/LEVERS
To activate the desired motor functions, operate the Joystick or Paddle/Lever that corresponds to the
desired motion.
To activate higher speed functions for those transmitter models so equipped, operate the Joystick or
Paddle/Lever further to activate the desired speed.
3.9
ROTARY SELECTOR SWITCH
The rotary selector switch can be used to select various modes of operation.
A rotary switch can have 2 to 12 positions to select from.
3.10 AUXILIARY SWITCHES
These switches activate special function relays that control items such as grab attachments, magnets,
lights, etc.
The auxiliary switches can be momentary or latched.
3.11 CONNECTING THE MLTX2 TO A COMPUTER
WARNING
TO PREVENT IGNITION OF FLAMMABLE OR COMBUSTIBLE ATMOSPHERES, AND TO AVOID
COMPROMISING INTRINSIC SAFETY OF THE EQUIPMENT, READ, UNDERSTAND, AND ADHERE TO THE
LIVE MAINTENANCE PROCEDURES BELOW.
Only trained Magnetek service personnel are permitted to connect the MLTX2 to a computer. Contact
Magnetek Service if service to the product is required.
