![background image](http://html1.mh-extra.com/html/magneti-marelli/007950015110/007950015110_user-manual_694025020.webp)
7
DESCRIPTION OF OPERATION
In standby mode the device displays the quantity of refrigerant available.
7.1
Description of functions
The station remembers selected A/C system filling parameters, linking them to the
registration numbers entered in the database. When servicing vehicle with the same
registration number again, it is possible to restore the parameters selected previously
during maintenance.
The station may also operate in the following modes:
Automatic program:
A vehicle with previously saved settings may be selected or a desired refrigerant
quantity may be input. The program will automatically calculate the time
necessary to achieve vacuum for the specific quantity of refrigerant.
Manual program:
The user selects the phases to be performed for a specific vehicle.
After selecting of the programs, follow the instructions on the display.
7.1.1
Memory card functions (optional)
For installed memory card,
in the automatic program, specific car model may be selected
from the database. Moreover, a diagnosis mode is available, which allows checking the
A/C system operating parameters, suggesting possible causes of failures.
7.2
Software functionality
Use
UP
and
DOWN
buttons to select the desired program.
Select
ENTER
to confirm.
Select
STOP/BACK
to stop the selected function and return to standby mode.
Select
STOP/BACK
to return to the previous screen in settings mode.
7.3
Editing
When entering vehicle registration numbers, the characters are selected successively as
follows:
UP
button – selecting successive letters/characters according to the diagram below, in
clockwise direction
DOWN
button - selecting successive letters/characters according to the diagram below, in
anti-clockwise direction
ENTER
– go to the next character
STOP/BACK
– return to the previous character
Hold
ENTER
button for 3 seconds to confirm entered chain of characters.