Pedestrian Barrier High Door MPH 112
Safety
16
5817,5005EN / Version 01
Risk of crushing
CAUTION!
CAUTION!
Risk of crushing!
… denotes the presence of components and items
moving towards each other. Non-observance of the
safety instructions can lead to minor injuries.
This pictogram is fixed on the following component:
– Drive
units
Hazard notes and occupational safety
For your own safety and for the protections of the barrier
modules, the following information must be observed and
complied with:
Electric current
DANGER!
DANGER!
Mortal danger by electric current!
Touching live parts can be lethal.
Damage to the insulation or to individual
components can be lethal.
Therefore:
– Switch off the power supply immediately in case
of damage to the insulation and arrange repair.
– Only electrical specialists may carry out work on
the electrical system.
– Always turn the power supply off and safeguard
against unintentional restarting before
maintenance, cleaning, and repair work.
– Before starting work ensure that the electrical
system is dead!
– Never bypass or deactivate fuses.
– When replacing fuses observe the correct
amperage specification.
– Keep moisture away from live parts, this can
result in short-circuit.
The following safety devices have to be installed on
site. The safety devices have to be provided by the
customer.
– Lockable two-pole mains switch
– Residual current device (RCD)
– Mains
circuit-breaker
