Pedestrian Barrier High Door MPH 112
Repair
96
5817,5005EN / Version 01
5. Loosen the nuts for the cover strip carrier. Do not remove the
nuts.
6. Loosen the screws on the clamping strip starting at the bottom
and working upwards. Do not remove screws.
1
2
1
2
2
2
Mag00028
Fig. 35: cover strip carrier, screws on the clamping strip
1
Nuts for the cover strip carrier
2
Clamping screws on the clamping strip
7. Pull out glass swing.
Assemble glass wing
1. Stick the glass wing into the appropriate clamping strip.
Secure the glass wings against falling down by the help of a
second person. Refer to Page 94, Fig. 34.
2. Tighten highest and lowest clamping screw, so that the glass
wing is fixed but can be positioned.
3. Position the glass wing. Set the following measures between
housing and glass wing:
MPH Standard: 150 mm
MPH Wide: 190 mm
Due to manufacturer tolerances, there may be differences.
