Pedestrian Barrier High Door MPH 112
Repair
5817,5005EN / Version 01
91
14.2 Dismantle and assemble the end housing
Definition
Mag00026
1
2
3
4
Fig. 31: Definition left and right end housing, central housing
1
Left end housing
2
Central housing
3
Right end housing
4
Observer, position barrier
Dismantle end housing
1. Switch off power supply.
2. Secure glass wings against fall-down by the help of a second
person.
3. Open the top cover of the left end housing.
4. Switch off pedestrian barrier at the mains switch. The mains
switch is located on the mounting plate "Master".
5. Disconnect the plug for the light barriers (ST1
ST4).
6. Disconnect the plug from the Barrier End Display.
7. Loosen the connecting screws in the two upper corners. See
8. Loosen the lower central screw.
9. Remove
end
housing.
