Full Height Turnstile MPT-152
Assembly and installation
31
5. Use a hoist to position support beam/connecting rod (Fig. 5,
Pos. 4 and 6) onto the guide combs and cage halves.
Mount the support beam so that the cover is accessible from
inside, from the secured area.
WARNING!
Risk of injury from a falling support beam!
6. Immediately secure the support beam using the 8 M 12 x 35
countersink screws supplied and tighten.
Fig. 10: Mounting the support beam
8
Mount guide combs (Fig. 5, Pos. 2) onto the connecting rod
(Pos. 5) using screw M12 x 40.
Fig. 11: Tightening the fastening screws
7. Tighten the fastening screws on the foundation using a size
SW 17 wrench.
