Full Height Turnstile MPT-152
Assembly and installation
36
5.4.6
Mounting the floor bearing, mounting the center columns
The mounting procedure for a floor bearing and a centre column is
described below. The second floor bearing and the second center
column are mounted in exactly the same way as the first floor bear-
ing and the first center column.
1
2
3
4
6
5
Mag00062a
7
Fig. 21: Floor bearing (synthetic bearing)
1 Screw
2 Spring
washer
3 Disc
4 Sleeve
5 Bearing
pin
6 Disc
7 Bearing
1. Mount the synthetic bearings on the finished floor.
Fig. 22: Place the center column on the floor bearing
2. Place the center column on the floor bearing.
