Full Height Turnstile MPT-152
Assembly and installation
39
5.4.9
Setting the blocked position (home position)
Fig. 26: Setting the full height turnstile to the "blocked" position
1 Cage
halves
2
Centre column: blocked position
3 Guide
comb
Fig. 27: Cam plate with proximity switch
1. Set the centre column to the "blocked" position (see Page 39,
2. Check whether the cam plate is exactly in front of the proximi-
ty switch.
If it is clearly offset, the full height turnstile must be adjusted
as follows.
3. Loosen the hexagon socket screw SW4 on the cam plate.
4. Turn the cam plate so that it is exactly in front of the proximity
switch.
5. Retighten the hexagon socket screw.
