Full Height Turnstile MPT-152
Troubleshooting
56
10 Troubleshooting
NOTE!
Additionally, dispose of the diagnostic program
MBC Diag for further diagnostics. Use this program
to read-out each error status from the MBC-110
and the associated MMC-120. For further infor-
mation contact your authorized dealer or MAGNET-
IC directly.
10.1 Malfunction: Logic controller MBC-110
Fig. 32: LEDs and display on the logic controller MBC-110
1
LED for outputs = green
2 One-digit
display
3
LED for inputs = red
The customer interface inputs and outputs of the MBC-110 indicate
their switching status through LEDs.
Red LED is switched on: Input is activated.
Red LED is switched off: Input is not activated.
