Operating Instructions
581E,5811_07
33
14. Setting of limit switches
The limit switches are factory set.
In case of a necessary replacement of the limit switches, the settings have to
be made according to the drawing.
1
1
2
3
4,5
4,5
4,5
4,5
4,5
4,5
1
1
2
3
Schalter so einstellen,
daß Nocke sicher erkannt wird.
Abstand zwischen 0,5 mm und 2,0 mm
Switches in such a way adjust, that cam
is surely recognized
Gap between 0,5 mm and 2,0 mm
01
01
01
01
0,5 - 2
mm
0,5 - 2
mm
Öffner (B4)
normally closed contact
Schließer (B5)
normally open contact
15. Warranty conditions
Subject to the condition that the operating instructions are observed,
and that no inadmissible operations are carried out on the technical
equipment, and that the installation has suffered no mechanical
damage, MAGNETIC guarantees all mechanical and electrical
components for the duration as stated in our standard terms of sales
and delivery or as contractually agreed in writing.
Fig. 22
