Magnetic Autocontrol VEK CN1, Operating Instructions Manual

3

/

3

Table of Contents 

1

Functional Description_________________________________________________________ 4

1.1

General __________________________________________________________________________ 4

1.2

Display and Setup_________________________________________________________________ 5

1.2.1

User interface buttons __________________________________________________________________5

1.2.2

Power Failure __________________________________________________________________________5

1.2.3

Display during normal operation _________________________________________________________5

1.3

Base menu – Setting the operating modes__________________________________________ 6

1.3.1

Modify/Correct current count ____________________________________________________________6

1.3.2

Set Relay Output manually to “Free” or “Occupied”_________________________________________6

1.3.3

Display and Counter reset _______________________________________________________________7

1.3.4

Reset all counters_______________________________________________________________________7

1.4

System menu – Installation specific Settings ________________________________________ 8

1.4.1

Operating Modes/ Switching point _______________________________________________________9

1.4.2

Count Hysteresis________________________________________________________________________9

1.4.3

Upper Count Level and lower Count Level ________________________________________________10

1.4.4

Display / Input settings _________________________________________________________________11

1.4.5

Output settings _______________________________________________________________________11

1.4.6

Power Save Mode _____________________________________________________________________12

1.4.7

Setting the Serial Interface  (optional) ____________________________________________________12

1.5

Factory Default __________________________________________________________________ 12

2

Installation Instructions_______________________________________________________ 13

2.1

Input voltage ____________________________________________________________________ 13

2.2

Reset Input (optional) ____________________________________________________________ 14

3

Technical Data _______________________________________________________________ 15