11
mTripod
Safety
2.3
Target groups
2.3.1
Operator and his responsibilities
The operator must comply with the statutory obligations regarding work safety.
In addition to the safety instructions and warning notes in these operating
instructions, the valid safety, accident prevention and environmental
protection regulations must be observed.
In particular, the operator must:
›
determine additional danger in a danger analysis.
›
implement the necessary behavioral requirements in work instructions for
operation with the product at the operating location.
›
regularly verify throughout the product time of use that the work
instructions drawn up by him comply with the current state of the
regulations.
›
adapt the work instructions to any new provisions, standards and usage
conditions - where required.
›
clearly regulate the responsibilities for all work on the product and with the
product such as installation, commissioning, operation, cleaning,
maintenance, etc.
›
that the personal protective equipment is worn.
›
ensures that all employees who work with the product or on the product
have read and understood the operating instructions.
Furthermore, the operator must train personnel regarding the use of the
product at regular intervals and provide information on possible dangers.
Furthermore, the operator is responsible for:
›
the product is always in perfect technical condition.
›
the product is maintained at specified maintenance intervals
›
the product is only operated within the permitted temperature range.
The operator is also responsible that the danger area of the product cannot be
accessed by any unauthorised persons under any circumstances.
Summary of Contents for MHTM FlowMotion mTripod
