37
MGC control unit
Description of menus and parameters
4.8
Menu "Factory settings"
IMPORTANT!
The parameters of the control unit are stored in the three
memory areas "Default settings", "Factory settings" and "User
settings".
The default settings are identical to the factory settings in these
operating instructions. The default settings are firmly store din
the firmware and cannot be changed.
The factory setting can be assigned factory- or product-specific
settings.
The user settings are the operating parameters.
Options in the menu "Factory settings"
The menu "Factory settings" offers the following options:
›
Restore factory settings: The stored parameters in the memory area
"Factory settings" are adopted as operating settings.
›
User settings as factory settings: The current parameter settings are stored
as factory settings. These factory settings can be used to receive project-
specific settings.
›
Default settings as factory settings: The factory settings are overwritten by
the default settings.
If you would like to assume the default settings as operating settings and the
factory settings were overwritten first, you need to use the option "Default
settings as factory settings" and then the option "Restore factory settings".
