52
Control unit MGC mTripod
Description of menus and parameters
Operational view > Main menu > Settings > Random check function
Parameter
Description
Mode
Set the function of the random check function.
Options
›
Deactivated: The random check function is not in operation.
›
Counting: If the number of passages since activation has reached the set
value for the "Hit range" parameter, a hit is reported and the passage is
blocked. For example, if you set the value "100" for the "Hit range"
parameter, a hit is generated every 100
th
passage.
A hit is confirmed via the "Random check function" input function. After
acknowledgement, the random check function counter restarts.
As soon as the random check function is activated, all passages are also
taken into account in the "Permanent open" operating mode. You can use
this function, for example, with simple 1-lane systems to grant access to a
certain number of people, such as in a gondola cabin.
›
Random: You can set the random probability using the "Hit range" and
"Count of hits" parameters. By activating the random check function, the
set "Count of hits" is randomly generated, which must lie within the set
"Hit range". For example, if you set the value "100" for the "Hit range"
parameter and "10" for the "Count of hits" parameter, hits are generated
randomly for 10 people out of 100.
A hit is confirmed via the "Random check function" input function. After
acknowledgement, the random check function counter restarts.
The "Random" mode is not active in the "Permanent open" operating
mode. I.e. in the "Permanent open" operating mode, the passages are
ignored for the "Random check function".
In "Random" mode, only passages with active individual validation are
taken into account so that a random hit is surprising for the user. Even in
the case of pedestrian gates with low pedestrian traffic, the user cannot
detect beforehand if a check is about to happen.
Factory setting
›
Deactivated
Hit range
The function depends on the selected mode.
For the "Counting" mode, use this parameter to set the value at which a hit
is to be generated.
For the "Random" mode, set the number range in which the random hits
must lie. For example, if you set the value to "100", the random hits must be
in the range 1 to 100.
IMPORTANT! The value for the "Count of hits" parameter can be a maximum
of 40 % of the value for the "Hit range" parameter. If the value set for the
"Count of hits" parameter is too high, the "Count of hits" parameter is
automatically adjusted.
Setting range
›
10 to 10000
Factory setting
›
1000
Summary of Contents for mTripod
Page 86: ...86 Control unit MGC mTripod...
Page 90: ...90 Control unit MGC mTripod...
Page 91: ...91 Control unit MGC mTripod...
