67
Control unit MGC mTripod
Function description
7.5
Special cases within the motion sequence
7.5.1
Stopping in mid-movement
If the blocking element is stopped in mid-movement, e.g. from the user not
moving on, the motor will continue to turn with a low force.
7.5.2
Vandalism attempt: Passage without authorisation
With this type of vandalism attempt, a user either tries to pass the turnstile
without validation or a user moves the blocking element against the released
direction.
The behaviour of the turnstile depends on the setting of the "Security mode"
parameter.
"
Security mode
" parameter:
"Security mode" parameter: Option "Without locking":
As soon as a user moves the blocking element beyond the home position in a
direction that is
not
released, the turnstile immediately tries to hold the
position of the blocking element with maximum force until the user no longer
pushes the blocking element or until the overload protection becomes
effective. If an angle of rotation of 70° has been exceeded, the passage is
released and the next end position is approached.
"Security mode" parameter: Option "With locking":
As soon as a user moves the blocking element beyond the home position in a
direction that is
not
released, the locking is activated until the user no longer
pushes the blocking element.
The turnstile signals this type of vandalism attempt as follows:
›
The output function "Buzzer/Siren (alarm)" is set
›
The output function "Vandalism" is set
The output function "Buzzer/Siren (alarm)" is parameterised ex works for the
event "Vandalism". The output function "Vandalism" is
not
parameterised ex
works.
Summary of Contents for mTripod
Page 86: ...86 Control unit MGC mTripod...
Page 90: ...90 Control unit MGC mTripod...
Page 91: ...91 Control unit MGC mTripod...
