19
58-601 Pulsar
®
Radar Transmitter
Function in
Function in
Arrows
Display Mode
Configuration Mode
Up and Down Moves forward and backward
Increases or decreases the
in the configuration program
value displayed or moves to
from one display to another.
another choice.
Note: Hold arrow key for
rapid scrolling.
Enter
Enters the configuration mode
Accepts a value and moves
(noted by an exclamation point to the next step of the
as the last character in the top
configuration program.
display line).
2.6.4 Password Protection (Default = 0)
The Radar transmitter is password protected to restrict
access to certain portions of the menu structure that affect
the operation of the system. When the proper password is
entered, an exclamation point (!) appears as the last char-
acter of the first line of the display. The password can be
changed to any numerical value up to 255. The password
is required whenever configuration values are changed.
The default password installed in the transmitter at the
factory is 0 (password disabled). The last step in the con-
figuration menu provides the option to enter a new pass-
word. If 0 is entered as a password, the transmitter is no
longer password protected and any value in the menu can
be altered (except diagnostic values) without entering a
confirming password.
NOTE: If the password is not known, the menu item New Password
displays an encrypted value representing the present pass-
word. Call the factory with this encrypted value to determine
the actual password.
The keypad has three arrows used to scroll through the
displays and to calibrate the transmitter – the Up and
Down Arrow (
) keys and the Enter (
) key.
