PAGE
DATE
PAGE REV
24 July 2019
B
209-00-24C
M24C PLUS FLIGHT MANUAL
84
5.14.1 BEFORE LANDING CHECKLIST
1. Before entering the circuit..............................contact airport facilities via radio (if necessary)
check traffic
cross the runway and check wind direction and
strength
identify the runway to use
2. Entering the circuit.........................................check traffic pattern
correct attitude and power to reach Vapp
enter the runway downwind at 45°
3. Downwind ......................................................enter according the parameters indicated for
the pattern
check engine parameters
4. Base leg.........................................................maintain specified altitude and speed
check traffic on final and on the runway
5. On final ..........................................................align with runway
reduce power to IDLE
keep best glide speed - Vapp
maintain alignment with the runway (left pedal)
NOTE:
If there is no airport activity and/or assistance and if the pilot does not know the runway,
before landing he should execute a low altitude pass along the runway to verify its general
condition (surface, obstacles, length, etc.).
