PAGE
DATE
PAGE REV
24 July 2019
B
209-00-24C
M24C PLUS FLIGHT MANUAL
60
18. Pre-rotation assembly, belts, cables and
flexible shaft.......................................................Tight
Condition
Free of corrosion, leaks or chafing and
not damaged
19. Battery and connecting wires ......................Tight
Free of signs of overheating, excessive
venting, corrosion of terminals or
leakage of acid
20. Voltage regulator and starter contactor .......Free of signs of overheating, short circuits or
corrosion
D. CONTROL RODS
21. Safety points on the control rods, linkages,
bearings and fiberlock nuts..........................Tight
Condition
22. Rod end bearings ........................................Insignificant play in the Uniball
Free of corrosion and not damaged
23. Control rods .................................................Shape (straight)
Not damaged
Free to rotate a small amount around their axis
when given a small twist. If unwanted force is
necessary or they will not rotate it can indicate
a problem with the bearing
E. TRIM SYSTEM
24. Trim actuator................................................Correct attachment
25. Control cable, springs and electrical
connections........................................................Condition
F. CLOSURE OF THE RIGHT HAND SIDE FAIRING
Close the right hand engine hatch and tighten the fasteners with a screwdriver a 1/4 turn.
Make sure the right hand engine fairing is closed and fastened correctly.