OPERATOR’S MANUAL
with Maintenance Information
Safety Rules
6
Maximum side slope rating stowed
Model
A B
ES0808H 25%
(14°)
25% (14°)
ES1008H 25%
(14°)
25% (14°)
ES0812H 25%
(14°)
25% (14°)
ES1012H 25%
(14°)
25% (14°)
ES1212H 25%
(14°)
25% (14°)
ES1412H 25%
(14°)
25% (14°)
ES1612HLB 25%
(14°)
25% (14°)
ES1612HCP 25%
(14°)
25% (14°)
ES0808E 25%
(14°)
25% (14°)
ES1008E 25%
(14°)
25% (14°)
ES0812E 25%
(14°)
25% (14°)
ES1012E 25%
(14°)
25% (14°)
ES1212E 25%
(14°)
25% (14°)
ES1412E 25%
(14°)
25% (14°)
ES1612ELB 25%
(14°)
25% (14°)
ES1612ECP 25%
(14°)
25% (14°)
Note: Slope rating is subject to ground
conditions and adequate traction.
Fall Hazard
The guard rail system provides fall protection.
During operation, occupants in the platform
must wear a full body harness with a lanyard
attached to an authorized lanyard anchorage
point. Attach only one (1) lanyard per lanyard
anchorage point.
Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform
floor at all times.
Do not climb down from the platform when
raised.
Keep the platform floor clear of debris.
Close the entry gate before operating.
Do not operate the machine unless the guard
rails are properly installed and the entry is
secured for operation.
Do not enter or exit the platform unless the
machine is in the stowed position.
Collision Hazard
Be aware of limited sight distance and blind
spots when driving or operating.
Be aware of extended platform position(s)
when moving the machine.
Check the work area for overhead obstructions
or other possible hazards.
Be aware of crushing hazards when grasping
the platform guard rail.
