Viewing Waveforms, Vectors, and Pictures
7-25
Figure 7-26. Picture Display with Waveform/Vector Mixed
Monitoring Signal Quality with Picture Guard (AVM-510A)
Picture Guard lets you watch a picture while monitoring certain signal elements or parameters. With a
System Video measurement screen selected, you can separately enable and disable up to 12 measured
items of video picture signal integrity. With Picture Guard enable, if one of the parameters goes
outside the tolerances you set, a small, rectangular icon pops up on the picture telling you which
parameter of the System Video measurement set has an error (see Figure 7-27).
NOTE:
When Picture Guard is enabled, the System Video measurement set, if not
selected, will automatically be selected. When Picture Guard is disabled, the
measurement set will be automatically changed back to the last measurement set selected
while not in Picture Guard.
You can activate Picture Guard using two methods: Press the
Auto Meas
button twice or the
Split
Screen
button twice. When you press the
Auto Meas
button the first time, the automeasure screen
appears. Pressing the
Auto Meas
button a second time turns Picture Guard on. When you press the
Split Screen
button the first time, the picture with a quarter-size waveform and vector appear at the
bottom of the display. Pressing the
Split Screen
button a second time displays Picture Guard if
Picture Guard is activated. When Picture Guard is on, there is a small Magni logo in the lower-right
corner of the display. This sign shows you Picture Guard is on and not simply looking at the picture
To activate Picture Guard for the
Split Screen
button:
1.
Press the
Config
button.
2.
Select DISPLAY and then press the
Entr
button.
3.
Select SPLIT SCREEN and then press the
Entr
button.
4.
Select PICTURE GUARD and then press the
Entr
button or turn the knob to switch between
ACTIVE or DISABLED.
5.
Press
Clr
Mnu
to exit.
Summary of Contents for MM-410
