Magni W 8, Use And Maintenance Manual

14 

INSTRUCTIONS FOR USE AND WARNINGS

Management of the controls

The  equipment,  like  the  entire  vehicle,  can  only  be 

operated if the following conditions are met:

• 

operator sitting correctly in the driver’s seat, 

• 

pressing  the  movement  enable  button  (DEAD 

MAN’S SWITCH) behind each joystick.

If one or both of the aforementioned conditions is not 

present, all the commands imparted are inhibited and 

this fault is signalled by means of a flashing light on 

the control panel on the side of the seat.

Description  of  the  controls  from  the 

RTH cab

B1

C1

C2

A2

A1

E1

E2

D1

D2

B2

• 

A1

:  move  the  joystick  forwards  to  lower  the 

telescopic boom;

• 

A2

:  move  the  joystick  backwards  to  raise  the 

telescopic boom;

•  B1

:  move  the  joystick  to  the  RH  to  rotate  the 

accessory downwards;

• 

B2

:  move  the  joystick  to  the  LH  to  rotate  the 

accessory upwards;

• 

C1

:  move  the  joystick  forwards  to  remove  the 

telescopic boom;

• 

C2

:  move  the  joystick  backwards  to  retract  the 

telescopic boom;

•  D1

: move the joystick to the RH to rotate the turret 

of the vehicle clockwise;

• 

D2

: move the joystick to the LH to rotate the turret 

of the vehicle anticlockwise;

• 

E1

: rotate the roller forwards to lift the hook;

• 

E2

: rotate the roller backwards to lower the hook.