16
INSTRUCTIONS FOR USE AND WARNINGS
How to connect the radio control
To activate the radio control, proceed as follows:
•
start the vehicle and confirm the accessory on the
multiple function display in the cab by pressing the
green button;
•
stabilise the vehicle with the reverse gear
in NEUTRAL and parking brake engaged;
•
on the CONTROLS PAGE or STABILISERS PAGE
on the multiple function display, activate the radio
control connection button;
•
turn the radio control on with the aforementioned
switch
[10]
and make sure the red emergency
button
[2]
is not locked in the safety position; check
this condition by rotating the button clockwise;
•
press the green button
[9]
to enable the connection.
Connection is indicated by the vehicle horn making
a warning sound.
If connection between the radio control and the
forklift truck has been interrupted by the red
emergency button being pressed (for the vehicle or
radio control), reactivate it as follows:
•
reset the red emergency button
[2]
by rotating it
anticlockwise;
•
press the green radio control button once
to reactivate the radio control/forklift truck
connection, confirmed by the vehicle horn making
a warning sound;
•
press the green radio control button again to start
the vehicle’s I.C. engine, confirmed by the vehicle
horn making a warning sound.
Controls
•
A1
: move the joystick forwards to lower the
telescopic boom;
•
A2
: move the joystick backwards to raise the
telescopic boom;
•
B1 with selector [7] on TILT:
move the joystick to
the RH to rotate the accessory downwards;
•
B2 with selector [7] on TILT
: move the joystick to
the LH to rotate the accessory upwards;
•
B1 with selector [7] on OPTIONAL
: move the
joystick to the RH to lift the hook;
•
B2 with selector [7] on OPTIONAL
: move the
joystick to the LH to lower the hook;
•
C1
: move the joystick forwards to remove the
telescopic boom;
•
C2
: move the joystick backwards to retract the
telescopic boom;
• D1
: move the joystick to the RH to rotate the turret
of the vehicle clockwise;
•
D2
: move the joystick to the LH to rotate the turret
of the vehicle anticlockwise.
