····
48
1.
MIG-V4 is not related to the function of operation on its display interface,
while it can browse input information, electrical state and communication,
etc.
2.
Single MIG-V4 must use a crossover cable when it connected with
MIG-H1 via LAN; if many MIG-V4 connected with MIG-H1 using switches,
there is no requirement for the order of cable.
3.
Single MIG-V4 supports two 1080p outputs. It can accomplish single
machine splicing.Multiple machines can obtain whole picture through
combining splicing which are completely synchronized.
4.
MIG-H1 input crop operation will take effect on all layer using the signal.
5.
Background capture steps: press “background capture”key in functional
zone of MIG-H1, choose storage location according to menu screen and
then begin to capture. It will prompt “OK”when progress bars shows
100%. Next, choose “load all background”in background setting menu,
after loading, we can select output screen 1 or 2 and choose the
corresponding background using “background 1-3”key in functional
zone. Capture background are main output images. Please note that do
not perform other operationsin the process of grasping and loading. We
must affirm every step finished before next step. Please select “load all
background” again after outage and restart of MIG-V4.
6.
It needs to lighten group key to save and load the preset of group. The
switch of group needs to be done with T-Bar.
Warning
