background image

18

z

q

w

e

r

Changing Needles

CAUTION:

Always make sure to turn the power switch off and
disconnect the machine from power supply before
changing the needle.

 

Raise the needle by pressing

the up/down needle button and lower the presser foot.
Turn off the power switch.

1 Loosen the needle clamp screw by turning it

counterclockwise.
Remove the needle from the clamp.

q

Needle clamp screw

2 Insert a new needle into the needle clamp with the

flat side of the needle to the rear.
When inserting the needle into the needle clamp,
push it up against the stopper pin and tighten the
needle clamp screw firmly.

w

Stopper pin

e

Flat side

To check needle straightness, place the flat side of the
needle onto something flat (a needle plate, glass etc.)
The gap between the needle and the flat surface
should be consistent.
Never use a blunt needle.

r

Gap

FABRIC

Chiffon, Georgette, Fine Lace, Organdy
Net, Tulle

Batiste, Voile, Lawn, Pure Silk, Crepe de Chine,
Sheer Crepe, Chambray, Handkerchief Linen,
Gingham, Challis, Percale, Wool Crepe, Peau de
Soie, Taffeta, Satin, Silk Surah, Satin-backed
Crepe, Qiana

Single Knits, Jersey, Swimwear, and Tricot

Leather Suede

Flannel, Velour, Velvet, Muslin, Velveteen,
Poplin, Corduroy, Broadcloth, Linen, Chintz,
Gabardine, Felt, Terry, Burlap, Quilted Fabrics

Double Knits, (synthetic and natural) Stretch
Velour, Stretch Terry, Sweater Knits

Leather, Vinyl, Suede

Denim, Sailcloth, Ticking

Double Faced Wool, Heavy Coating, Fake Fur,
Drapery Fabrics

Leather, Suede

Canvas, Duck, Upholstery Fabrics

Topstitching for Special Finishes

TYPE of NEEDLE

Universal
Ball Point

Blue Tipped Needle
Universal

Blue Tipped Needle
Ball Point

Wedge Point
Leather Needle

Universal

Ball Point

Wedge Point
Leather Needle

Denim Needle

Universal

Wedge Point
Leather Needle

Universal

Topstitching Needle

WEIGHT

Very Light

Light

Medium

Heavy

Very Heavy

NEEDLE SIZE

9 (65)
9 (65)

11 (75)
11 (75)
12 (80)

11 (75)
11 (75)

11 (75)

14 (90)

14 (90)

14 (90)

16 (100)

16 (100)

16 (100)
18 (110)

16 (100)

14 (90)

Summary of Contents for 7330





























Reviews: