© 2016 Sensata Technologies
11
Operation
4.0 Operation
This section covers the basic operation of your MagWeb GT. The
MagWeb GT has a two-line, 40-character alphanumeric LCD display
that enables easy programming and operation.
4.1
Using the Menu Button
On the side of the MagWeb GT, press and hold the MENU button
(Figure 16) for 2 seconds. The MagWeb GT’s menu appears (see
Figure 17 below).
Figure 16, MagWeb GT Menu Button
The MagWeb GT has the
following menu structure:
Figure 17, MagWeb GT Menu Structure
Press and hold the MENU button to cycle thru the menus. Release
the button to gain access to the functionality of each menu item.
Exit Menu: Press to return the MagWeb GT to the normal operating
screen (see Figure 14 or 15).
Signal Level: The communication strength between microinverters
and the MagWeb GT is measured from 1-5. A higher number of “=”
symbols indicates a stronger signal strength (Figure 18).
Note: The signal level does not display if there is no PLC detected.
Figure 18, MagWeb GT Signal Level Screen
Level:
[=====]
Note: The MagWeb GT
must be successfully
initialized in order to
cycle through its menus.
MENU
Exit Menu
Signal Level
Status
Turn Off All
Summary of Contents for MagWeb GT
Page 1: ...Owner s Manual MagWeb GT ...
