MF CT200
- 8 -
STEP 4:
Fix the Seat (8) to the Seat sliding joint (7) and tighten it with cross multifunctional spanner.
Adjust the seat to a suitable position, lock Seat sliding joint (7) onto Seat post (6) with knob (G).
Pull the Spring knob (G) out, insert the Upright seat post (6) into the Mainframe (1), and finally fix it with
Spring knob (G).
STEP 5:
Adjust the Handle bar (5) to a suitable angle. Insert the T like screw (F) through Handlebar chunk cover (21),
Bushing (20) and Washer (19) to fix the Handlebar (5) onto the Handlebar post (4).
STEP6:
Connect the Handle pulse wire (22) and Trunk wire (15) to the wire of the Display (9) correctly. Attach the
Display (9) to Handlebar post (4), tighten the Display (9) with Washer D5 (B) and Cross pan head screw
M5x15.(A)