11
LUBRICATION
MAGNUM INDUSTRIAL 20" HEAVY-DUTY PLANER
MI-31550 / MI-31552 / MI-31553
FIGURE 20: LUBRICATING ELEVATION SCREWS
20
FIGURE 22: LUBRICATING CHAINS
22
FIGURE 24: LUBRICATING CHAINS
24
FIGURE 21: LUBRICATING SLIDING SURFACES
21
FIGURE 23: LUBRICATING CHAINS
23
FIGURE 25: LUBRICATING ROLLER SPRINGS
25
LUBRICATION
• Lubricate the
ELEVATION SCREWS (A)
SLIDING SURFACES (B)
and
CHAINS (C)
every month. Use all-purpose grease
for the
CHAINS
and
ELEVATION SCREWS
. Use all-purpose oil for the
SLIDING SURFACES
. See Figures 20 to 24.
• Lubricate the spring rollers via the four
SET SCREWS (D)
after every 30 hours of operation.
Use all-purpose oil. See Figure 25.
• The cutterhead bearings are lubricated and sealed at the factory and require no further maintenance.
Summary of Contents for MI-31550
Page 1: ...MODEL NO MI 31550 MI 31552 MI 31553 OPERATING MANUAL...
Page 16: ...43 1 43 2 43 3 43 4 43 5 43 6 PARTS LIST FOR MI 31550 MI 31552 MI 31553 43 1 6 7 2 3 4 5 1...
Page 17: ...PARTS LIST FOR MI 31550 MI 31552 MI 31553...
Page 18: ...PARTS LIST FOR MI 31550 MI 31552 MI 31553...
