manualshive.com logo in svg

Magnum 232751, Operation

The Magnum 232751 Operation Manual is a comprehensive guide for effortlessly navigating and utilizing the features of the Magnum 232751. Designed for ease of use, this free downloadable manual is a must-have for users seeking detailed instructions and tips. Download it now from 88.208.23.73:8080.

Share
Download
background image

Graco Standard Warranty/

Hsbdp!

/

i”ƒ…‘B

B

 

56

3Z9478A

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in 
material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any 
special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any 
part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained 
in accordance with Graco’s written recommendations.

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in 
material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any 
special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any 
part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained 
in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty 
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of 
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with 
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or 
maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of 
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned 
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs 
will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED 
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. 

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy 
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or 
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT 
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to 
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these 
warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or 
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the 
negligence of Graco, or otherwise.

FOR GRACO CHINESE/KOREAN CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, 
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English.

!HSBDP!

0

Q

BitceqB

B

B

B

B

B

B

B

B

B

B

B NB

B

B

B

NB

B B

B

B

B

B

B

B

P

TO PLACE AN ORDER OR FOR SERVICE, contact your Graco distributor, 

or call 1-888-541-9788 to identify the nearest distributor.

!Hsbdp!

2.999.652.:899!

B

B

B

B

B

P

B

B

B

BRTOWYWOZR[S

B

B

B

B

P

Graco Standard Warranty/

Hsbdp!

/

i”ƒ…‘B

B

Summary of Contents for 232751

























































Reviews:

No comments

Related manuals for 232751

Lafferty A-40 SS Installation & Operation Instructions preview
A-40 SS
Brand: Lafferty Pages: 4
Earlex ASG55 Operating Instructions Manual preview
ASG55
Brand: Earlex Pages: 12
O'Brien 223-635 C series Owner'S Manual preview
223-635 C series
Brand: O'Brien Pages: 24
GAMA evolution G-35 H Service Manual preview
evolution G-35 H
Brand: GAMA Pages: 45
P.Lindberg 9063928 Manual preview
9063928
Brand: P.Lindberg Pages: 14
AMBIC Classic Instructions Manual preview
Classic
Brand: AMBIC Pages: 9
q-Tech Q-T3 Instruction Manual preview
Q-T3
Brand: q-Tech Pages: 15
BUFFALO TURBINE BT-CS4 Original Instructions And Parts Manual preview
BT-CS4
Brand: BUFFALO TURBINE Pages: 34
Titan 335-500 Owner'S Manual preview
335-500
Brand: Titan Pages: 20
Titan 0508074A Owner'S Manual preview
0508074A
Brand: Titan Pages: 40
Titan 0290005 Owner'S Manual preview
0290005
Brand: Titan Pages: 56
Titan 200 Operating Manual preview
200
Brand: Titan Pages: 156
allen MPS9910 Safety & Operation Manual preview
MPS9910
Brand: allen Pages: 40
Hardi FOAM MARKER Standard Operator'S Manual preview
FOAM MARKER Standard
Brand: Hardi Pages: 36
Graco XM Plural-Component Brochure & Specs preview
XM Plural-Component
Brand: Graco Pages: 8
Graco XHF Instructions And Parts preview
XHF
Brand: Graco Pages: 16
3M 10 Owner'S Manual preview
10
Brand: 3M Pages: 34
Earlex Spray Port HV7000A Operating Instructions Manual preview
Spray Port HV7000A
Brand: Earlex Pages: 12

Brands by name

Popular brands

Load more brands