Magnum Cosmo S, Manual

2.Installation and Adjustment

2.4 Saddle Height

The quick-release lever must require noticeable effort to put into fully closed position to prevent any unde-

sired movement while riding.

WARNING

An improperly closed quick release lever can open again or have limited ability to keep the saddle in place. 

This may cause the saddle to suddenly drop into the seat tube, potentially leading to serious falls and injury.

MIN

 INS

ERT

There is a minimum insertion line marked on the seat post 

(failure to observe the minimum insertion line can result 

in serious injury); please ensure the seat post is always 

inserted into the seat tube beyond this line (the line must be 

inside the seat tube).
Loosen the quick release lever at the top of the seat tube, 

determine the appropriate saddle height and tighten the 

clamp.
The clamping force can be adjusted by adjusting the bolt on 

the quick release lever.
The quick release lever must be closed with considerable 

counter pressure.

2.Installation and Adjustment

2.5 Saddle Adjustment

The saddle can also be tilted and adjusted in the forward/

back direction.
Loosen the bolt at the bottom (4).
Adjust the saddle tilt by pressing down on the front or rear 

of the saddle
Move the saddle forward or backward to adjust for arm/

torso length and desired riding position.
Tighten the bolt (4) to secure the saddle.

�

Installation & Adjustment

07