309044
27
Gear/Yoke Kit
XR Gear/Yoke Replacement Kit 243230
Replace the gear/yoke assembly as follows:
Disassembly
See
Pressure Relief
Procedure
on page 6.
1.
Relieve the pressure.
2.
Remove the four cover screws and front cover.
3.
Remove yoke and guide rods.
4.
Carefully slide pump forward 3/8 in. (10 mm) on its
mounting pins, and remove gear.
You do not
have to remove the pump to remove the gear.
Installation
D
Read all
Installation Notes
in service drawing on
facing page.
D
For easier parts placement, tip sprayer backwards
during installation.
1.
Remove gear, and use applicator brush to spread
entire contents of grease packet (included with Kit
243230) into gear teeth of new gear. Grease must
be worked into roots of gear teeth to ensure long
life. Reinstall gear.
2.
Carefully position new gear in drive housing, and
slide pump back into place.
3.
Do Steps 6 through 8 in
Installation
above.
