1. Technical specification
Power supply
AC 230V / 50Hz
Welding processes
MIG, MAG, MMA, Lift TIG,
Nonfusion welding
Technology
IGBT
Welding current MIG
40A - 200A
Welding current MMA / TIG
150A
Duty cycle
60%
Current regulation
Stepless (fluent)
No load voltage
58V
Power consumption
6.2 kVA
Wire spool weight
5 kg
Compatible wire diameter
0.6 / 0.8 / 0.9 / 1.0 mm
Minimum fuse
20A
Protection class
IP21S
Weight
10 kg
Dimensions
415 x 245 x 398 mm
2 roll wire feed
YES
2. Applications
Magnum MIG 190 II Digital is intended for standard MIG/MAG welding but also MMA and TIG Lift. The
device is made for metal arc welding of low-alloy, high-alloy, carbon steels.
The manufacturer is not liable for damage caused by improper use of the device.
3. Welding machine description
3.1 Front view
1. Overheat/Mulfunction indicator light
2. Power ON indicator light
3. Welding process selector switch
MMA/MIG/TIG
4. Wire feed button
5. Welding current regulation knob (MMA)
6. Polarization selector plug
7. Cable connector ( + / - )
8. Mig torch EURO connector
9. Wire feed speed regulation knob
10. Welding voltage regulation knob for MIG
11. Burnbuck function regulation knob
12. Welding voltage display (V)
13. Welding current display (A)
4. Preparing the device to work
-
Before use please make sure that electric net you are going to use is corresponding to
technical specification of the device. Power supply voltage and frequency is provided in the
technical specification section of this manual.
-
Please check that the ground wire is connected to power socket ground line. Check the if
the fuse is sufficient and not less than 20A.
-
In case of changing the plug follow the instructions to connect the green/yellow wire to the
ground line in your socket.
