Configuration Process
12
To add outputs to the EBOX, select profile and manufacturer and click on the “+”.
Options:
- Rename:
Renames the output. Renaming allows you to add additional information to
each BACnet point that a device creates. You are able to add text to the
beginning / end of the Name or Description to provide additional identifiers
(Room
numbers,
Office
names,
etc.).
- Delete:
Deletes the output.
- Add to sensor list:
Adds output to the sensor list so it can be used as an input for the device it is
supposed
to
control
- Destination / MsgServer:
Some devices need to be addressed (instead of using broadcast messages).
Others may only be able to receive commands in a very short window, after
they have sent a message themselves. Both can be configured here. Please
refer to the device manual.
- Send LRN:
Sends a learn telegram to the sensor. LRN sends 1 4BS learn telegram
- LRN(3x):
Sends 3 consecutive learn telegrams.
- LRN(UTE):
Sends 1 UTE telegram (please refer to device manual)
- Change BACnet ID:
Take from input
