Use and installation manual for a MAGNUM sauna stove
16.06.2015 9
Starsauna Oy
Technical support:
Pistotie 4
info@magnumkiuas.fi
15860 Hollola, Finland
Section II.6
Directions for using the sauna
Heat the sauna stove once before taking it into use, as the protective
substances in the new stones may give off odors while the sauna stove is
heating. Ensure sufficient ventilation.
The recommended temperature is 55-70 degrees.
The sauna stove heats to a proper sauna temperature in approximately 25 –
50 minutes, depending on the size of the sauna stove, the size of the sauna
and the ventilation.
Use water that is suitable for domestic use when throwing water on the
stove for heating the sauna.
Do not throw water on the stove if there are people next to it, as the water
splashing from the sauna stove and the steam it creates are burning hot.
Move carefully in the sauna, as the floors may be slippery.
Quality requirements for the heating water
Water condition:
Effect:
Recommendation:
Water containing humus
Color, taste, deposits
<12 mg/l
Water containing iron
Color, odor, taste, deposits
<0.2 mg/l
Hardness: the most important
substances are manganese
(Mn) and chalk or calcium
(Ca)
Deposits
Mn: <0.05 mg/l
Ca: <100 mg/l
Water containing chloride
Health risk
Use is banned
Seawater
Fast corrosion
Use is banned
RC Installation Template, cut out from here.
-----------------------------------------------------------------------------------------------------------------------
