18
1.
Screw inlet screen onto suction tube.
System is ready for next use.
Flush system (Steps 1 to 9, page 4) before spraying next coating.
inlet screen
2.
Coil up hose. Leave it
connected to sprayer
and gun.
Preparing for Storage
Stowing Sprayer
M
AGNUM
XR7 & XR9 have hose/cord
wrap brackets on handles.
3.
Wrap power cord around
cord wrap bracket.
4.
Place suction
tube and prime
tube in container
to catch any
drips.
Connect hose here
3
1.
Unscrew tip & guard assembly from
gun to prepare for priming.
Setup
4.
Turn power switch OFF.
Assembling New Sprayer or Setting Up Sprayer that Has Been Stored
3.
Connect other end of hose to sprayer.
If hose is
already
connected,
make sure
connections
are tight.
2.
Uncoil hose, and
connect one end to gun.
5.
Turn Pressure Control knob all the
way left (counterclockwise) to
minimum pressure.
