Priming
WASTE
PRIME
1.
Turn Spray/Prime
valve to PRIME.
Flushing Out Factory or Storage Fluid and Loading Pump with Water
7.
Plug sprayer into
grounded outlet,
and turn power
switch ON.
5.
Screw Power Flush
attachment (included
with sprayer) onto
garden hose, and
open Power Flush
attachment.
prime tube
prime
tube
suction
tube
Power Flush
attachment
suction tube
garden hose
(turn on)
4
garden hose
open
closed
2.
Separate prime tube
(smaller) from
suction tube (larger).
4.
Place prime tube
in waste pail.
6.
Screw garden
hose and Power
Flush attachment
onto suction tube,
and turn on
garden hose.
Power Flush
attachment
8.
Turn Pressure Control
knob to the right
(clockwise) until pump
starts.
Water flowing out of
prime tube indicates
pump is primed with
water.
3.
Unscrew inlet
screen
from
suction
tube.
30 to 60
seconds
9.
Let water flow out
of prime tube into
waste pail for 30
to 60 seconds.
WASTE
17
6.
When storage fluid comes out of prime tube (in 5 to 10 seconds),
turn power switch OFF.
watch for storage fluid from
prime tube (in 5 to 10 seconds)
7.
Turn Spray/Prime valve to SPRAY to keep storage fluid in sprayer
during storage.
SPRAY
WASTE
4.
Turn power switch ON.
Shutdown and Cleaning
Replacing Water with Storage Fluid
5.
Turn Pressure Control knob to the
right (clockwise) until pump starts.