background image

Five-Year Limited Warranty

This  MAGNUS  product  is  warranted  to  the  original 
purchaser  to  be  free  from  defects  in  materials  and 
workmanship under normal consumer use for a period 
of one (5) years from the original purchase date or thirty 
(30)  days  after  replacement,  whichever  occurs  later. 
The  warranty  provider’s  responsibility  with  respect  to 
this limited warranty shall be limited solely to repair or 
replacement, at the provider’s discretion, of any product 
that fails during normal use of this product in its intended 
manner and in its intended environment. Inoperability 
of  the  product  or  part(s)  shall  be  determined  by  the 
warranty provider. If the product has been discontinued, 
the  warranty  provider  reserves  the  right  to  replace 
it  with  a  model  of  equivalent  quality  and  function.
 
This warranty does not cover damage or defect caused 
by misuse, neglect, accident, alteration, abuse, improper 
installation  or  maintenance.  EXCEPT  AS  PROVIDED 
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER 
ANY  EXPRESS  WARRANTIES  NOR  ANY  IMPLIED 
WARRANTIES,  INCLUDING  BUT  NOT  LIMITED  TO 
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. This warranty 
provides  you  with  specific  legal  rights,  and  you  may 
also have additional rights that vary from state to state. 

To  obtain  warranty  coverage,  contact  the  Magnus 
Customer  Service  Department  to  obtain  a  return 
merchandise authorization (“RMA”) number, and return 
the defective product to Magnus along with the RMA 
number and proof of purchase. Shipment of the defective 
product  is  at  the  purchaser’s  own  risk  and  expense.
 
For  more  information  or  to  arrange  service,  visit 
www.magnustripods.com  or  call  Customer  Service  at 
212-594-2353.

Product warranty provided by the Gradus Group.

www.magnustripods.com

Magnus is a registered trademark of the Gradus Group. 

© 2019 Gradus Group LLC. All rights reserved.

Thank you for choosing Magnus.

Magnus REX VT-4000-PRO tripod is designed 
with advanced features that professional 
videographers and cinematographers require of 
their camera-support systems. It’s constructed 
with sturdy, high-grade aluminum legs with 
flip locks that provide stable support in the 
most demanding environments. The video 
head boasts professional features that will 
accommodate most on-the-go videographers, 
and it delivers dependable camera security as 
well as smooth fluid movement. 

Specifications

Legs

Material:

 Anodized aluminum alloy

Head Attachment Fitting:

 65 mm bowl

Leg Stages / Sections:

 Two stage

Leg Lock Type:

 Flip lock

Independent Leg Spread:

 Yes

Spreader:

 Mid level (adjustable)

Spiked / Retractable Feet:

 Nonretractable spikes with 

removable nonslip rubber feet

General

Load Capacity:

 11 lb. (5 kg)

Maximum Working Height:

 63.5 in. (161.3 cm)

Minimum Working Height:

 28.3 in. (72 cm)

Folded Length:

 31.5 in. (80 cm)

Weight:

 9.9 lb. (4.5 kg)

Materials:

 Anodized aluminum alloy

Bubble Level:

 Yes

Head

Counterbalance System:

 Spring loaded

Quick-Release Plate:

 0.3×1.7×2.7 in. (0.7×4.2×6.9cm)

Quick-Release Safety:

 Yes

Camera Mounting Screw:

 1/4-20, 3/8-16

Built-In Balance Plate:

 Yes

Tilt Drag:

 Adjustable, fluid

Tilt Range:

 -65°/+80°

Tilt Lock:

 Yes

Pan Drag:

 Fixed, fluid

Pan Range:

 360°

Pan Lock:

 Yes

Pan-Handle Rosettes:

 2 (left and right)

Leveling Bubble / Illuminated:

 Yes, unilluminated

Head Mount Type: 

65 mm half ball

Two-Stage Video Tripod 
with Fluid Head

VT-4000-PRO

4000H/TL650A

Owner’s 

Manual

•  Please read and follow these instructions, and keep this 

manual in a safe place.

•  Never set up or pull down a tripod while a camera is 

mounted.

•  Do not move the tripod or adjust the legs while a camera 

is mounted.

•  Do not exceed the maximum weight capacity of the 

tripod.

•  Never leave a camera unattended on the tripod.

•  The camera should be securely fastened to the quick-

release mounting plate before mounting onto the tripod.

•  Never mount a camera to the tripod until all tripod legs 

are locked and stabilized.

•  Do not stand on, rest on, or hang anything from the mid-

level spreader.

•  Do not lift or move the tripod by the head.

•  Keep hands clear of the inside of the legs, to avoid 

trapping fingers.

•  Safe operation of the tripod is the user’s responsibility.

•  All images are for illustrative purposes only. 

Precautions

GG2

Summary of Contents for Rex VT-400-PRO











Reviews: