Attaching the VPH-10P to Your Tripod
1
The VPH-10P has a 3/8-16 tripod mount.
To mount the head to a tripod with a
1/4-20 stud, use the included reducer
bushing. Screw the bushing into the
tripod mount before you attach it to the tripod.
2
Attach the head to
the tripod by screwing
it into the tripod’s
mounting stud. If
you’re using a very
small tripod, you may
find it easier to hold the
VPH-10P steady and
screw on the tripod.
Mounting Your Camera on the VPH-10P
1
To unlock the quick-release plate, push the quick-
release lever away from the quick-release plate, and
slide the plate out of the quick-release mechanism.
2
Use the thumbscrew on the quick-release plate to
attach it to your camera. Make sure the thumbscrew
is flush against the bottom of the plate.