USB HID IntelliHead Swipe Reader
TRACK_ID_ENABLE PROPERTY
Property ID:
0x04
Property Type:
Byte
Length: 1
byte
Get Property:
Yes
Set Property:
Yes
Default Value:
0x95
Description:
This property is defined as follows:
id 0 T
3
T
3
T
2
T
2
T
1
T
1
Id
0 – Decodes standard ISO/ABA cards only
1 – Decodes AAMVA and 7-bit cards also
T
#
00 – Track Disabled
01
–
Track
Enabled
10 – Track Enabled/Required (Error if blank)
This property is stored in non-volatile memory, so it will persist when the unit is
power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
Example Set
Track ID Enable
property Request (Hex):
Cmd Num
Data Len
Prp ID
Prp Value
01 02
04
95
Example Set
Track ID Enable
property Response (Hex):
Result Code Data Len
Data
00 00
Example Get
Track ID Enable
property Request (Hex):
Cmd Num
Data Len
Prp ID
00 01
04
Example Get
Track ID Enable
property Response (Hex):
Result Code Data Len
Prp Value
00 01
95
20
Summary of Contents for 99875320-5
