6 - Operation
DynaFlex II| Product Family | Installation and Operation Manual
Page 37 of 78 (D998200554-10)
6.4.2
Device Information Page
While powering up, the display briefly shows a page of information about the device, including the
installed firmware part numbers and versions and other identifying information. To determine a device’s
PCI certification status, compare the contents of this screen to the device’s listing on
Approved PTS Devices
. Note that in PCI listings, lowercase “x” is a
wildcard meaning ‘any single character.’
Figure 6-3 - Device Information Screen
To view details pertinent to the device’s PCI certification status on WLAN enabled devices
- including
the installed firmware part numbers and versions as well as other identifying information (see
- complete the following actions:
While on the
Welcome
screen, press the Pushbutton and hold for 3 beeps to access to
Settings
menu,
then select
Firmware
, and
Main
to return to the
Welcome
screen, select
Back
and
Exit
Figure 6-4 - Device Information Screen for WLAN device
6.4.3
Connection Status Page
In addition to the icons at the top of the display, WLAN enabled devices have a
WLAN Status
screen
that reports more details about the device’s 802.11 wireless (see
). To access it, while on the
Welcome
screen, press the Pushbutton and hold for 3 beeps to get to the
Settings
menu, then select
Connection
, and
WLAN Settings
, and
WLAN Status
. To return to the
Welcome
screen, select
Back
and
Exit
