background image

6 - Operation 

DynaFlex and DynaFlex Pro| Three-way Secure Card Reader Authenticators | Installation and Operation Manual 

 

Page 28 of 56 (

D998200382-10

6.2

 

Operation Overview 

When DynaFlex Pro is ready to begin a new transaction, it shows 

Welcome

 or a custom image on the 

LCD display. 

 

Figure 6-1 - Welcome Page (Ready for a New Transaction) 

During normal operation, the operator initiates a transaction from the host, and the cardholder interacts 
with the device.  Devices with a touchscreen display provide on-screen prompts and interactive features 
such as buttons and signature capture. 
 
Transaction types may include new accounts, teller window applications, checking, savings, mortgages, 
retail transactions, or any other type of transaction where there is interaction between the cardholder and 
the operator.  For each transaction type, the host software can direct the device to prompt the cardholder 
for any combination of magnetic stripe swipe, EMV contact card insertion, and/or contactless payment 
tap, and the transaction flow on the device may differ depending on what the host software specifies and 
what the cardholder does.  Section 

6.9 Card Reading

 provides examples of the cardholder experience for 

each type of payment.  

Figure 6-2

 shows a typical point of sale (POS) transaction sequence. 

 
If the device can not read payment data, the host software may direct it to prompt the cardholder to repeat 
the action, or request the cardholder revert to a different form of payment (such as using the magnetic 
stripe reader as a fallback instead of the chip card insertion slot).  In the case of an EMV transaction with 
a successful chip read, the device uses the transaction amount and the chip card’s on-chip risk 
management to decide whether to process the transaction offline or require online approval. 
 
 

 

Summary of Contents for DynaFlex

























































Reviews: