3 - Installation and User Guidance
DynaGlass| Payment Terminal | PCI PTS POI Security Policy
Page 11 of 22 (
D998200455-10
)
3
Installation and User Guidance
3.1
Initial Inspection
After receiving DynaGlass, the merchant should visually inspect the device as follows:
1)
Inspect the label found on the bottom of the device (see section
) and
make sure the label is not missing, obscured, or modified.
2)
Check the PCI Hardware Identifier on the device label and make sure it matches one of the
Hardware #
listed for the device on the PCI web site for Approved PIN Transaction Security (PTS)
Devices.
3)
Check the device serial number (S/N) and make sure it matches the labels on shipping materials and
documentation.
4)
Visually inspect the device, per
D998200442 DYNAGLASS DEVICE INSPECTION
, which is
included in the package with the device.
5)
Power on the device and make sure it shows the Android home screen, which indicates it is fully
powered on and has not detected attempts to tamper.
6)
Follow the steps in section
to view the PCI firmware versions installed on the device. Make
sure these match one of the
Firmware #
values listed on the PCI web site for DynaGlass. Note that
in PCI listings, lowercase “x” is a wildcard meaning ‘any single character.’
3.2
Installation
Connect the device to the dedicated charger and cable included with the device, in an attended
environment. The device should be placed away from sources of heat, moisture, dust, and
electromagnetic radiation (e.g. display screens, motors, security tag mechanisms, and so on).
