SAFET Y INFORMATION
H
MagTek ® Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | f 562-546-6301 | www.magtek.com | support@magtek.com
© Copyright 2022 MagTek, Inc. PN D99875635 Rev. 21 10/22
SAFETY
This product has been evaluated by multiple safety certification agencies, including Underwriters Laboratories (UL) and the United
States Federal Communications Commission (FCC Class A and Class B), and is designed to protect both the user and the device. This
document is written specifically to work in conjunction with these safety and integrity features to protect the user and the device. It is very
important to follow all steps in the product documentation carefully, in the order in which they are described, and at the recommended
times. Failure to do so could result in personal injury, and / or cause damage to the device, and / or void the product warranty.
PRINT SAMPLE CARD
1. Press the MENU button to open the
Main Menu page.
2. Press the SAMPLES button to open the
Samples page, which presents four
sample card options.
3. Select the sample you wish to create.
The EC2000 has default card stock
hoppers set for each sample. (Review
the Installation and Operation Manual
for details.)
4. Press the PRINT button.
5. The EC2000 will create the selected
sample card.
G
Close the ExpressCard 2000 top access door.
SAFETY REQUIREMENTS
Caution: Never do any of the following:
•
DO NOT use a ground adapter plug to connect equipment to a power socket-outlet that lacks a ground connection terminal.
•
DO NOT attempt any maintenance function that is not specifically described in this manual or in other ExpressCard 2000 instructional
documents published by MagTek.
•
DO NOT remove any of the covers or guards that are fastened with screws. There are no user-serviceable areas within these covers.
•
DO NOT override or “cheat” electrical or mechanical interlock devices.
•
DO NOT use EC2000 supplies or cleaning materials for other than their intended purposes.
•
DO NOT operate the equipment if you or anyone else have noticed unusual noises or odors.
Consider the following before operating the ExpressCard 2000:
•
Connect the EC2000 to a properly grounded AC power socket-outlet. If in doubt, have the socket-outlet checked by a
qualified electrician. Improper connection of the device’s grounding conductor creates a risk of electric shock.
•
Place the EC2000 on a solid surface that can safely support the weight of the device and that of a person leaning against
the device (such as a service technician).
• Be careful when moving or relocating the device. Use proper lifting techniques.
•
Use materials and supplies specifically designed for MagTek devices. Using unsuitable materials may result in poor
performance, and in some cases may be hazardous.
