MICRImage Check Reader
16
01 Check the Power to the MICRImage Reader
Possible causes for this problem are:
•
AC adapter connection to outlet - make sure the AC adapter is securely connected to outlet
on the wall or power strip.
•
AC adapter connection to MICRImage Reader - make sure the AC adapter is securely
connected to the power jack on the Cable.
•
Power strip - if using a power strip, make sure the strip is connected to outlet on the wall and
the switch on the strip is turned on.
•
AC adapter is defective - replace the AC adapter.
Determine if any of the conditions described above are true:
◊
If yes, rectify and continue to step 00.
◊
If no, continue to step 17.
02 Read a check
Read a check through the MICRImage Reader:
◊
If the check is transported all the way around the check path, continue to step 03.
◊
If the check gets "stuck" in the check path, continue to step 10.
◊
If the motor does not turn on, continue to step 17.
03 Did PC receive data?
After the check is read, did the PC receive any data?
◊
If yes, continue to step 04.
◊
If no, continue to step 05
Summary of Contents for MICRImage
