M A G U I R E P R O D U C T S , I N C .
Edition: August 6, 2014
44
W E I G H S C A L E B L E N D E R
®
Maximum weight exceeded –
When enabled, if the MAX (parameter) weight is exceeded, the system will
stop and the Alarm will sound. This might occur if a valve sticks open or slightly open. Normally the system
recovers automatically from such events with only the one batch blended incorrectly. Set the flag only if you
want the system to stop and alarm.
Batch complete (Batch Mode) –
When enabled, the alarm will sound when the batch weight is complete.
See page 41 for details on Batch Mode.
Enable mix motor failure alarm –
When enabled and used with the Mix Motor Failure Kit (KIT-075T), this
alarm will sound when the mix motor fails to move during intended operation.
Cycle time out:
When enabled, this alarm will sound when the MCT parameter is activated. When MCT is
used, it monitors sequential cycle times, and alarms (when alarm is enabled) if a cycle time exceeds the
previous cycle time by an amount that is not consistent with proper operation. This provides a means to
detect mechanical failures such as a sticking valve or weigh bin gate. For more information, see MCT the
parameter on page 60.
Resets
Clear Totals –
Pressing Clear Totals will reset all component totals back to zero. Component totals are
visible from the main screen by pressing the View button. Component totals are also visible through MLAN
communications.
Save/Restore Settings –
Used for saving or restoring previously saved parameters. For more information on
Saving and Restoring Settings, see “Saving Parameters in the User Backup Settings” on page 63.
Change Passwords –
Used to set access passwords for Manual Mode, Program Mode and Thumbwheel
Unlock. Default passwords are: 11111 for Manual Mode, 22222 for Program Mode and 14789 for
Thumbwheel unlock.
Software Update –
Software Updates to Touchscreen Controller. See “Updating Controller Firmware” on
page 80.
Summary of Contents for Weigh Scale Blender WSB
