background image

w w w . m a g u r a . c o m
s e r v i c e @ m a g u r a . d e

5

Español     Italiano     Nederlands     Français     

English 

Deutsch 

Contaminating the pads with oil and lubricants will cause a permanent 

loss of braking power. 

Clean contaminated rims and pads with isopropyl alcool or with

warm dishwater.

See further hints about the brake pad change on page 13.

5

. Release your brake lever and check whether your wheel moves freely and without

drag. Check eventually whether the wheels are correctly mounted and if the quick release
skewers are tightened sufficiently. 

6. 

Are your tires in a good condition, and have they enough air pressure? Test this

with your fingers. Lift up your bike and turn the wheels of your bike. An insufficient rotati-
on might be due to damaged tires, broken axles and/or broken spokes.

7. 

Pick up your bike and let it drop from a moderate height. Listen for any rattling 

noises. If any are heard check the bearings and all screwed connections.

8. 

Always follow the instructions given in the owner’s manual of your bicycle.

Never use your bicycle if any of the points mentioned above relate to your

bicycle. Consult a professional bike mechanic if you feel unsure. A faulty bicycle
may result in serious accidents with possible fatal injuries of the rider!

For a transport in an aircraft you can leave your brake as it is, e.g. you do not have

to empty it.

Beside of this there are no further activities necessary. Always make sure that the 

hose is not snapped or damaged during transport!

4. Transport of the bicycle

5. Warranty

MAGURA is giving a 

5 year leakproof warranty

on brake levers (master 

cylinder) and brake callipers. Watch out for the red info sheet in the middle of this manual!

This warranty is void when damage to the brake has occurred from 

the following:

abuse 
mixing and matching the brake with parts from other manufacturers
damage of the exterior finish caused by improper use
any attempt to disassemble the whole brake
modifications
non-factory changes or improper service

We expressly point out that a warranty claim is only accepted with a clear

proof of purchase (payment receipt of the dealer!) and recommend to register
your brake online on magura.com

Summary of Contents for MAGURA HYDRAULIC BRAKE





















Reviews: