26
BA082201-en
8.3
Operation of AL II 2.6 PH W / 2.6 PH S
Raising
1 Turn the left-hand operating handle in a clockwise direction.
Lowering
1 Verify that there is no danger of pinching.
2 Actuate button on the box.
Arms are retracted automatically, when axle jack reaches preset height. Height
can be set by adjusting the corresponding valve.
Manual Lowering
1 Turn both operating handles in a counterclockwise direction.
Unloaded arms are retracted automatically, when axle jack reaches preset
height.
8.4
After Usage
1 Lower the axle jack into bottom position.
2 Remove the extenders and hang them up at the holders provided.
3 Move the axle jack to its defined park position in order to avoid damage.
