29
BA082201-en
9.4
Refilling with Hydraulic Fluid
1 Raise axle jack to maximum height.
2 Remove filling plug.
CAUTION
Do not turn the release lever as long as the filling plug is removed. Fluid reservoir is
put under pressure!
3 Fill hydraulic fluid up to the hole of the fill screw.
The filling quantity is 0.6 l. Use hydraulic fluid with viscosity ISO VG 15.
4 Re-attach filling plug.
9.5
Troubleshooting
Error
Diagnosis
Remedy
Axle jack does not raise to
the desired height.
Fluid level too low.
Re-fill hydraulic fluid.
Axle jack locked.
Check whether the safety
stop lever is in neutral po-
sition and can be freely
moved.
Axle jack cannot be com-
pletely lowered.
Axle jack damaged or
rough-running.
Check for damage, oil
mechanical parts.
Axle jack continues to
lower although the safety
stop lever has been re-
leased.
Air in hydraulic system.
Bleed the hydraulic cylin-
der in unloaded condition.
9.6
Spare Parts
To ensure safe and reliable operation, only use original spare parts supplied by the
equipment manufacturer.
